{"id":213,"date":"2023-02-22T11:00:49","date_gmt":"2023-02-22T02:00:49","guid":{"rendered":"http:\/\/133.125.84.183\/en\/knowledge\/connector\/"},"modified":"2023-10-12T09:26:44","modified_gmt":"2023-10-12T00:26:44","slug":"connector","status":"publish","type":"page","link":"http:\/\/133.125.84.183\/en\/recommendedarticles\/connector\/","title":{"rendered":"Connector Terminals"},"content":{"rendered":"\n<h2 class=\"wp-block-heading\">index<\/h2>\n\n\n\n<ul class=\"list-anchor-link\">\n<li><a href=\"http:\/\/133.125.84.183\/en\/recommendedarticles\/connector\/#01\">Introduction to connector terminals<\/a><\/li>\n\n\n\n<li><a href=\"http:\/\/133.125.84.183\/en\/recommendedarticles\/connector\/#02\">Manufacturing methods for connectors<\/a><\/li>\n\n\n\n<li><a href=\"http:\/\/133.125.84.183\/en\/recommendedarticles\/connector\/#03\">Functions of connectors<\/a><\/li>\n\n\n\n<li><a href=\"http:\/\/133.125.84.183\/en\/recommendedarticles\/connector\/#04\">Materials for connectors<\/a><\/li>\n\n\n\n<li><a href=\"http:\/\/133.125.84.183\/en\/recommendedarticles\/connector\/#05\">Surface finish plating<\/a><\/li>\n\n\n\n<li><a href=\"http:\/\/133.125.84.183\/en\/recommendedarticles\/connector\/#06\">Shapes of connector terminals<\/a><\/li>\n\n\n\n<li><a href=\"http:\/\/133.125.84.183\/en\/recommendedarticles\/connector\/#07\">FINECS's connector terminals contributing to electrical contacts<\/a><\/li>\n<\/ul>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" id=\"01\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">FINECS\u2019s connector terminals contributing to electrical contacts<\/h2>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-8 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:15%\"><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<div class=\"wp-block-columns is-layout-flex wp-container-5 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" loading=\"lazy\" width=\"170\" height=\"126\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-2.jpg\" alt=\"connector\" class=\"wp-image-4259\"\/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"760\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-3-1024x760.jpg\" alt=\"Connector terminal\/pin\" class=\"wp-image-4260\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-3-1024x760.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-3-300x223.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-3-768x570.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-3.jpg 1078w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" loading=\"lazy\" width=\"689\" height=\"512\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-4.jpg\" alt=\"Terminal pin\/Terminal\" class=\"wp-image-4261\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-4.jpg 689w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-4-300x223.jpg 300w\" sizes=\"(max-width: 689px) 100vw, 689px\" \/><\/figure>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:15%\"><\/div>\n<\/div>\n\n\n\n<p>\u3000&nbsp;Connectors are components used to electrically connect two circuits or parts, and are included in a wide variety of products such as electronic devices,<br>household appliances, industrial machinery, automobiles, and telecommunications equipment. In general, there are two types of connectors:&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">male connectors (plugs) and female connectors (receptacles).<\/mark><br>Connecting a plug and a receptacle enables the transmission of electrical signals.<\/p>\n\n\n\n<p>\u3000A connector generally consists of conductive parts, which are made of metal, and surrounding non-conductive parts, which are made of molded resin, plastic, or other non-conductive material.<br>The metal parts are referred to as&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">\u201cterminals,\u201d \u201ccontacts,\u201d<\/mark>&nbsp;etc., and they are also divided into&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">male terminals (or posts, pins, etc.)<\/mark>&nbsp;and<br><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">female terminals.<\/mark><\/p>\n\n\n\n<p>\u3000This page focuses on&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">the metal parts<\/mark>&nbsp;that function to conduct electricity, and further explains in detail the male connector terminals, which constitute FINECS\u2019s main product range.<\/p>\n\n\n\n<p><\/p>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" id=\"02\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Types of male connector terminals based on manufacturing methods<\/h2>\n\n\n\n<p>Connector terminals are roughly divided into three categories by processing method, as follows:<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff11\uff09\u3000Press-formed terminals<\/h5>\n\n\n\n<p>Terminals made by press working out of metal strips (hoops)<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff12\uff09\u3000Headed (plastic-worked\/ forged) terminals<\/h5>\n\n\n\n<p>Terminals made by heading (plastic working\/ forging) out of metal wire<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff13\uff09\u3000Machined terminals<\/h5>\n\n\n\n<p>Terminals made by machining out of metal rods or metal wire<\/p>\n\n\n\n<p>The characteristics of each method are as follows:<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">1. Connector terminals made by press working out of metal strips<\/h3>\n\n\n\n<p>\u3000 Using commonly available standard metal strips (hoops), which are supplied in large quantities in the market, means that the material can be acquired at a relatively low cost. In addition, press working is a relatively high-speed manufacturing process suited for mass production. Furthermore, press working can also be used to make high-precision items,<br>as is shown by the fact that this method is used to manufacture terminals for narrow-pitch connectors that require high-precision processing, such as board-to-board connectors and FPC connectors used within smartphones and other mobile devices. On the other hand, this process involves the generation of punching slugs as a result of blanking the metal,<br>which leads to material loss and can be a cost-increasing factor.<\/p>\n\n\n\n<p>\u3000 As for plating to press-formed terminals, if a pre-plated metal strip, to which plating has been applied in advance, is used, the cut-off surfaces will not be plated, and bare metal will be exposed after the press-forming process. Therefore, if plating is necessary for the purpose of preventing oxidation or corrosion, non-plated metal strips should be used, and the plating should be applied after the press-forming process. With regard to the shapes and surface conditions, the cut-off surface by press working is apt to have fractured sections with rough surface conditions and tiny burrs on the edges.<\/p>\n\n\n\n<p>\u3000 With respect to the initial costs for the equipment, the presswork requires relatively strong and rigid dies, and high-precision dies depending on the products to be formed.<br>These dies tend to be significantly more expensive than wire heading dies (for headed terminals) and machining tools and fixtures (for machined terminals), which constitutes a negative factor for manufacturing products that have a short life cycle, products with uncertain demand, and low-volume production items.<br>In addition, press working involves relatively large force applied to the metal strips for shearing (punching) them, causing the profiles of the connector terminals to become somewhat deformed.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2. Connector terminals made by heading (plastic working) out of metal wire<\/h3>\n\n\n\n<p>\u3000 Materials for connector terminals made by heading (plastic working) out of metal wire are divided into two types: plated wire and bare wire. Currently, the most prevalent method for plating wire (pre-plated wire) intended to be used for connector terminals is tin reflow plating. There are two types of undercoat that are typically used for tin plating:<br>nickel undercoat and copper undercoat. When bare wire is used, plating (tin plating, gold plating, etc.) is generally applied using barrel plating after the terminals have been formed.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">Advantages in using wire to make connector terminals<\/h5>\n\n\n\n<p>Advantages of headed terminals are as follows:<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff11\uff09\u3000 Initial cost of dies is significantly smaller than that of press dies.<\/h5>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff12\uff09\u3000Equipment can be adjusted to process terminals with different lengths without having<br>to make new dies.<\/h5>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff13\uff09\u3000Plating can be applied securely to all four sides of each terminal.<\/h5>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff14\uff09\u3000Metal waste, which is typical of press working, is not generated, which contributes to reducing cost and environmental impact.<\/h5>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff15\uff09\u3000 Cross-sectional shape of wire drawn by dies remains in shape (cross-sectional shape of the terminal does not deform or warp).<\/h5>\n\n\n\n<p>\u3000To be more specific, the dies used with the automatic pin processing machine to form wire are smaller than those for press working and have simpler structure and configuration; therefore, <strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">the initial cost of dies&nbsp;can be held down to roughly one fifth to one tenth. Accordingly,&nbsp;initial investment costs can be significantly reduced.<\/mark><\/strong><\/p>\n\n\n\n<p>\u3000As for different lengths of connector terminals, they can be handled simply by adjusting the processing machine. This is also an advantage of using wire because, in the case of press working using metal strips, it will be necessary to make new dies, or at least modify the dies.<br>With regard to plating, when using pre-plated wire, it is possible to maintain the plating evenly on all four side surfaces of each terminal. In contrast, in the case of press working using pre-plated metal strips, it is not possible to have the sheared surfaces plated.<\/p>\n\n\n\n<p>\u3000 As for material waste, the processing of wire does&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">not generate punching waste&nbsp;<\/mark>as would be generated by press working.<br>The punching waste increases for thicker plates and with larger pitches. Although it is possible to sell the punching waste as scrap metal, the selling price is cheap.<br>This also means that the energy used in the process of manufacturing the material is wasted, and therefore it is not an eco-friendly production method. In the case of metal wire forming, almost the entire material is used without waste to make connector terminal products, so this method is considered more environmentally friendly.\u3000<\/p>\n\n\n\n<p>\u3000 Furthermore, in the case of press working, a large pressing force is applied to the entirety of the material strip, and the shearing force causes deformation of the cross-sectional shape of the terminal, making the finished shape vertically asymmetric. In contrast, in the case of metal wire forming, force is applied to only limited part of the wire and the generation of burrs can be minimized.<br><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">Connector terminals can be finished with smooth surfaces&nbsp;and&nbsp;almost symmetrical cross-sections both vertically and horizontally.<\/mark><\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-12 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:15%\"><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:70%\">\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" loading=\"lazy\" width=\"669\" height=\"265\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-5.jpg\" alt=\"Press die and Wire forming die\" class=\"wp-image-189\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-5.jpg 669w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-5-300x119.jpg 300w\" sizes=\"(max-width: 669px) 100vw, 669px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:15%\"><\/div>\n<\/div>\n\n\n\n<h3 class=\"wp-block-heading\">3. Terminals made by machining out of metal rods or metal wire<\/h3>\n\n\n\n<p>\u3000Machining is used for shapes and precision that can only be achieved by machining, such as&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">processing of complex shapes<\/mark>&nbsp;and&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">ultra high precision products.<\/mark><br>Terminals of some special connectors are also made using machining.<\/p>\n\n\n\n<p>\u3000Using&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">NC lathes or special machine tools<\/mark>, machining can accurately achieve complex shapes that cannot be formed by press working or wire heading. However, since<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">&nbsp;workpieces can only be processed one by one<\/mark>, the number of items processed per unit time is limited, resulting in inferior productivity.<br>In addition, it takes a long time to set up the equipment, and&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">production costs tend to be high<\/mark>.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-16 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:15%\"><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:70%\">\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"510\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-6-1024x510.jpg\" alt=\"\u69d8\u3005\u306a\u52a0\u5de5\u65b9\u6cd5\uff08\u30d7\u30ec\u30b9\u52a0\u5de5\u3000\u5207\u524a\u52a0\u5de5\u3000\u7dda\u6750\u306e\u30d8\u30c3\u30c0\u30fc\u52a0\u5de5\uff09\" class=\"wp-image-190\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-6-1024x510.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-6-300x149.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-6-768x383.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-6-1536x765.jpg 1536w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/02\/connector-en-6.jpg 1542w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:15%\"><\/div>\n<\/div>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" id=\"03\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Functions of connectors<\/h2>\n\n\n\n<p>Assumed&nbsp;functionsof connector terminals include the following:<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff11\uff09\u3000Conductivity (transmission and supply of electric power)<\/h5>\n\n\n\n<ul>\n<li>Carrying electric current<\/li>\n\n\n\n<li>Securing conduction capacity<\/li>\n\n\n\n<li>Facilitating electric current flow<\/li>\n<\/ul>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff12\uff09\u3000Conductivity (signal transmission)<\/h5>\n\n\n\n<ul>\n<li>Feeding and interrupting electric current<\/li>\n<\/ul>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff13\uff09\u3000Fitting\/retaining\/locking<\/h5>\n\n\n\n<ul>\n<li>Preventing coming-off<\/li>\n\n\n\n<li>Resisting vibration<\/li>\n\n\n\n<li>Preventing rust<\/li>\n\n\n\n<li>Enabling disassembly<\/li>\n\n\n\n<li>Enabling reuse (connection)<\/li>\n\n\n\n<li>Enabling reliable signal transmission through retention<\/li>\n<\/ul>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" id=\"04\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Materials for connectors<\/h2>\n\n\n\n<p>Typical materials used for connector terminals are as follows:<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff11\uff09\u3000 Brass: JIS C2600 (Cu 70%, Zn 29%), C2700 (Cu 65%, Zn 34%)<\/h5>\n\n\n\n<p>&nbsp;In terms of material costs, C2700 is slightly less expensive due to lower copper content.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff12\uff09\u3000Phosphor bronze: JIS C5071 (Cu 98%, Sn 2%); Phosphor bronze Class 2: C5191 (Cu 94%, Sn 6%)<\/h5>\n\n\n\n<p>Used for connector terminals that require spring-like characteristics.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff13\uff09\u3000Pure copper: JIS C1020 (oxygen-free copper), JIS1100 (tough pitch copper)<\/h5>\n\n\n\n<p>&nbsp;Used for terminals that require conductivity, such as power supply terminals.<br>Material costs are higher than brass due to higher copper content.<\/p>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" id=\"05\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Surface finish plating for connector terminals<\/h2>\n\n\n\n<p>Typical plating processes for connector terminal surfaces are as follows:<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff11\uff09\u3000Tin (Sn) plating (nickel undercoat, copper undercoat)<\/h5>\n\n\n\n<p>\u3000 Tin plating is the most common plating process applied to connector terminals.<br>Tin plating is roughly divided into two types depending on when the treatment is applied: post-process plating,<br>where barrel plating is applied to terminals that have already been formed using unprocessed material; and pre-process plating, where continuous plating is applied to metal strips or wire before being formed into terminals.<br>Methods of pre-process tin plating include tin reflow plating, which, in addition to providing a smooth surface finish, is intended to reduce the generation of whiskers by relieving the internal stress in the plated area.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">\uff08\uff12\uff09\u3000Gold (Au) plating (nickel undercoat)<\/h5>\n\n\n\n<p>\u3000 Gold plating can be applied to the entire surface, or only to the tips (partial gold plating) to reduce the use of gold.<br>Gold plating is used for connector terminals that require more reliable electrical contact.<\/p>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" id=\"06\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Shapes of connector terminals<\/h2>\n\n\n\n<p>Connector terminals are roughly divided into two types depending on the material wire shape:square pins made by processing square wire, and round pins made by processing round wire.<br>There are also partial differences in shape, and the following are some examples:<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Partial forming (end forming, mid-part forming)<\/h3>\n\n\n\n<h4 class=\"wp-block-heading\">\uff11\uff0e End tapering<\/h4>\n\n\n\n<p>Tapering the ends of pins enables smooth insertion or fitting to the mating part (female side, substrate).<br>The tapered portion can be partially rounded to reduce the insertion force and prevent scratches on the mating parts such as contacts.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-21 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-full\"><img decoding=\"async\" loading=\"lazy\" width=\"516\" height=\"387\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_01-1024x768-1.jpg\" alt=\"\" class=\"wp-image-5423\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_01-1024x768-1.jpg 516w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_01-1024x768-1-300x225.jpg 300w\" sizes=\"(max-width: 516px) 100vw, 516px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-full\"><img decoding=\"async\" loading=\"lazy\" width=\"787\" height=\"590\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_02-1024x768-1.jpg\" alt=\"\" class=\"wp-image-5424\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_02-1024x768-1.jpg 787w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_02-1024x768-1-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_02-1024x768-1-768x576.jpg 768w\" sizes=\"(max-width: 787px) 100vw, 787px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-full\"><img decoding=\"async\" loading=\"lazy\" width=\"538\" height=\"403\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_03-1024x768-1.jpg\" alt=\"\" class=\"wp-image-5425\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_03-1024x768-1.jpg 538w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_03-1024x768-1-300x225.jpg 300w\" sizes=\"(max-width: 538px) 100vw, 538px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" loading=\"lazy\" width=\"814\" height=\"610\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_04-1024x768-1.jpg\" alt=\"\" class=\"wp-image-5426\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_04-1024x768-1.jpg 814w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_04-1024x768-1-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_04-1024x768-1-768x576.jpg 768w\" sizes=\"(max-width: 814px) 100vw, 814px\" \/><\/figure>\n<\/div>\n<\/div>\n\n\n\n<h4 class=\"wp-block-heading\">\uff12\uff0eStraight cutting and barrel finishing<\/h4>\n\n\n\n<p>Where tapering is not necessary, pins after being cut off can undergo a barrel finishing process in order to remove sharp edges.<br>It is also possible to adjust the chamfering radius as needed.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-26 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"768\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_05-1024x768.jpg\" alt=\"\u30b9\u30c8\u30ec\u30fc\u30c8\u30ab\u30c3\u30c8\" class=\"wp-image-3102\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_05-1024x768.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_05-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_05-768x576.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_05-1536x1152.jpg 1536w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_05-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-full\"><img decoding=\"async\" loading=\"lazy\" width=\"825\" height=\"620\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_06-1024x768-1.jpg\" alt=\"\" class=\"wp-image-5428\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_06-1024x768-1.jpg 825w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_06-1024x768-1-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/09\/2_about_connector_terminals_and_pins_06-1024x768-1-768x577.jpg 768w\" sizes=\"(max-width: 825px) 100vw, 825px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><\/div>\n<\/div>\n\n\n\n<h4 class=\"wp-block-heading\">\uff13\uff0eMid-flange forming<\/h4>\n\n\n\n<p>The mid-flange functions to make the terminal stably fixed in the substrate or housing.<br>It also prevents terminals from coming out of the housing at the time of removing or attaching a connector.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-31 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"768\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_07-1024x768.jpg\" alt=\"\u4e2d\u3064\u3070\u5165\u308a\u5186\u9310\u30c6\u30fc\u30d1\" class=\"wp-image-3104\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_07-1024x768.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_07-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_07-768x576.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_07-1536x1152.jpg 1536w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_07-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"768\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_08-1024x768.jpg\" alt=\"\u4e2d\u3064\u3070\u5165\u308a\u89d2\u9310\u30c6\u30fc\u30d1\" class=\"wp-image-3105\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_08-1024x768.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_08-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_08-768x576.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_08-1536x1152.jpg 1536w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_08-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><\/div>\n<\/div>\n\n\n\n<h4 class=\"wp-block-heading\">\uff14\uff0ePress-fit configuration<\/h4>\n\n\n\n<p>The press-fit configuration allows the omission of soldering to circuit board through-holes.<br>There are a variety of press-fit configurations, including those patented by individual companies.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-36 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"768\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_09-1024x768.jpg\" alt=\"\u30d7\u30ec\u30b9\u30d5\u30a3\u30c3\u30c8\u7aef\u5b50\" class=\"wp-image-3106\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_09-1024x768.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_09-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_09-768x576.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_09-1536x1152.jpg 1536w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_09-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"978\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-10-1024x978.jpg\" alt=\"\u30d7\u30ec\u30b9\u30d5\u30a3\u30c3\u30c8\u7aef\u5b50 H\u578b\" class=\"wp-image-4266\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-10-1024x978.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-10-300x286.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-10-768x733.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-10.jpg 1195w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">Type H<\/figcaption><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"978\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-11-1024x978.jpg\" alt=\"\u30d7\u30ec\u30b9\u30d5\u30a3\u30c3\u30c8\u7aef\u5b50 N\u578b\" class=\"wp-image-4267\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-11-1024x978.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-11-300x286.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-11-768x733.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-11.jpg 1195w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">Type N<\/figcaption><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"978\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-12-1024x978.jpg\" alt=\"\u30d7\u30ec\u30b9\u30d5\u30a3\u30c3\u30c8\u7aef\u5b50 M\u578b\" class=\"wp-image-4268\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-12-1024x978.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-12-300x286.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-12-768x733.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/connector-12.jpg 1195w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">Type M<\/figcaption><\/figure>\n<\/div>\n<\/div>\n\n\n\n<h4 class=\"wp-block-heading\">\uff15\uff0eCrushing\/dimpling<\/h4>\n\n\n\n<p>This type of forming is applied to the fitting section to provide retaining force to prevent the terminal from coming out of the housing.<br>Various shapes are available.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-41 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"768\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_13-1024x768.jpg\" alt=\"\u5341\u5b57\u3064\u3076\u3057\u5165\u308a\u89d2\u9310\u30c6\u30fc\u30d1\" class=\"wp-image-3110\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_13-1024x768.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_13-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_13-768x576.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_13-1536x1152.jpg 1536w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_13-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" loading=\"lazy\" width=\"1024\" height=\"768\" src=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_14-1024x768.jpg\" alt=\"\u89d2-\u8033\u51fa\u3057\u30c4\u30d6\u30b7\u89d2\u9310\u30c6\u30fc\u30d1\" class=\"wp-image-3111\" srcset=\"http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_14-1024x768.jpg 1024w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_14-300x225.jpg 300w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_14-768x576.jpg 768w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_14-1536x1152.jpg 1536w, http:\/\/133.125.84.183\/en\/wp-content\/uploads\/sites\/2\/2023\/03\/about_connector_terminals_and_pins_14-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><\/div>\n<\/div>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" id=\"07\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">FINECS's connector terminals contributing to electrical contacts<\/h2>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-47 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:100%\">\n<p>\u3000 FINECS\u2019s connector terminals are critical components that bring about electrical contacts to products in a wide range of fields, including household appliances, digital equipment, mobile devices such as smartphones, computers, automobiles, industrial machinery, robots, medical equipment, and aviation parts.<br>A conductive failure of an electrical contact at even one connector terminal leads to a malfunction of the entire equipment;<br>therefore, connector terminals&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">must always be of reliable quality<\/mark>.<\/p>\n\n\n\n<p>\u3000 FINECS has been manufacturing connector terminals\/pins out of wire for more than 30 years using automatic pin processing machines produced in house, responding to a wide variety of customer needs. Having realized an automation system to minimize manpower through integrated in-house design and production of everything from the wire plating processes to terminal processing machinery, we are aiming to be a&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">manufacturer that can achieve a world-class QCD performance<\/mark>&nbsp;through low-cost production and stable mass-productivity.<br>Furthermore,&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">through the application of value engineering (VE), we are striving to manufacture the most valuable products in the world to meet customer needs with respect to connector terminal functionality<\/mark>.<br>FINECS will continue to contribute to our customers and society by&nbsp;<mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">providing unique FINE solutions<\/mark>&nbsp;for connector terminals\/pins of all kinds and varieties.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-45 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"http:\/\/133.125.84.183\/wp\/wp-content\/uploads\/2023\/07\/DSC_7527-1-1024x683.png\" alt=\"\" class=\"wp-image-8501\"\/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"http:\/\/133.125.84.183\/wp\/wp-content\/uploads\/2023\/02\/connector-25-1024x683.jpg\" alt=\"\u591a\u7a2e\u591a\u69d8\u306a\u30b3\u30cd\u30af\u30bf\u7aef\u5b50\u30fb\u30d4\u30f3\u3092\u88fd\u9020\u3059\u308b\u7aef\u5b50\u52a0\u5de5\u6a5f\" class=\"wp-image-1493\"\/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"http:\/\/133.125.84.183\/wp\/wp-content\/uploads\/2023\/02\/connector-28-1024x681.jpg\" alt=\"\u5e38\u306b\u5b89\u5b9a\u3057\u305f\u54c1\u8cea\u3092\u63d0\u4f9b\u3059\u308b\u305f\u3081\u306e\u30b3\u30cd\u30af\u30bf\u7aef\u5b50\u30fb\u30d4\u30f3\u306e\u88fd\u54c1\u691c\u67fb\u53ca\u3073\u6e2c\u5b9a\u306e\u69d8\u5b50\" class=\"wp-image-1496\"\/><\/figure>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>For terminal &#038; pin production, press-formed &#038; molded parts, surface treatments, and automated machinery, ask FINECS!<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":5104,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_lmt_disableupdate":"","_lmt_disable":"","footnotes":""},"acf":[],"_links":{"self":[{"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/pages\/213"}],"collection":[{"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/comments?post=213"}],"version-history":[{"count":64,"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/pages\/213\/revisions"}],"predecessor-version":[{"id":5588,"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/pages\/213\/revisions\/5588"}],"up":[{"embeddable":true,"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/pages\/5104"}],"wp:attachment":[{"href":"http:\/\/133.125.84.183\/en\/wp-json\/wp\/v2\/media?parent=213"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}